ICEIAN 0 Posted January 4, 2013 Hi, I have just bought the above system and after playing about with the settings I did a system restore to factory setting, however this has put all the menu's into Chinese, can anyone help me get them back to English? Share this post Link to post Share on other sites
ICEIAN 0 Posted January 5, 2013 H2.64 http://www.sunluxy.com/p.html Share this post Link to post Share on other sites
aibudo 0 Posted January 5, 2013 That's the compression type. Is there a model number anyplace on the unit? What about the box it came in? Can you supply a picture? Share this post Link to post Share on other sites
ICEIAN 0 Posted January 5, 2013 Hi, it just says H.264 network DVR on the front of the unit and on the box. I contacted them and all they have done is send me a link which is below: http://drivers.amazplus.com/download/UJ1325_Driver.rar I have downloaded and unzipped it but how do I get it on to the system its self? Kind Regards Share this post Link to post Share on other sites
aibudo 0 Posted January 5, 2013 When I Googled UJ1325 DVR, your model came up on Amazon and eBay. If you have unzipped the driver file, then copy it to a blank "thumb" drive that goes into a USB jack on the rear of DVR. They should have instructed you into how to install the software from the external drive. Maybe the owners manual will instruct you into how to do it. I don't like to advise on this as if I tell you wrong and the DVR becomes totally unuseable, then I'm faulted for it. If I had a DVR that I couldn't use (as it appears that's the case), I would take the thumb drive that you have copied the file to, and with the DVR turned off, insert the drive into the USB port on the back of the DVR. Not where the mouse goes, but the other one. Turn on the DVR and see what you get. Go from there. Just a suggestion to start. Dennis Share this post Link to post Share on other sites
spidabyte 0 Posted January 26, 2013 left click on mouse clik on 2nd square from bottom click on 3rd icon on top row( looks like a cog wheel)click on first icon on top row(looks like cog wheel) Click on down arrow on 3rd square in of seven rows top selection should be english press ok & done hope this helps Share this post Link to post Share on other sites
ICEIAN 0 Posted January 27, 2013 left click on mouse clik on 2nd square from bottom click on 3rd icon on top row( looks like a cog wheel)click on first icon on top row(looks like cog wheel)Click on down arrow on 3rd square in of seven rows top selection should be english press ok & done hope this helps Thank you, yes that helped... Share this post Link to post Share on other sites
betimi91 0 Posted February 23, 2014 can you tell me how you upgraded sunluxy 4ch dvr because I cannot do it in mine... when i try to do it it says it firmware file not found.... Share this post Link to post Share on other sites
