NVR wont work with tv , yet works with monitor via HDMI

[icallyou604 0]

I brought the Duhua 8 channel from http://hdsecuritystore.com/product_info.php?products_id=225

 

I cant get it to work via HDMI with my P65st50 panasonic tv neither directly to the tv or to the AVR, yet it works fine on my computer monitor via HDMI? is this a tv issue, or do i need a firmware upgrade for my NVR?

[lowpro 0]

Have you tried connecting the nvr to the tv via composite? If I recall correctly, others have had the same issue. You go into the menus settings and then adjust the display settings. That should light up the hdmi port.

Edited January 11, 2013 by Guest

[vin2install 0]

It might be outputting from the HDMI at a lower resolution and the tv doesnt support it. Monitors are a little more flexible on that matter.

[Ingrid 0]

This is the setting for a Duhua 4ch,

 

How to use HDMI output for NVR

For NVR HDMI output, please make sure:

 

1. customer connect with VGA output first, and go to NVR setting -> Display

 

2. change resolution from 1280 x x1024 to 1920 x1080

 

3. and save it, reboot the NVR

 

4. Connect HDMI cable from NVR to HDMI Monitor

 

* BNC output from DVR can't change resolution to HDMI