cliff369 0 Posted January 9, 2013 Morning, Looking to put in 3-4 wireless G or N VGA to 2MP cameras in a house and use the Avigilon VMS. What are you guys seeing or recommending out there for wireless solutions that don't cost to much. I know there is the Axis-1033W/34W which is natively supported but it's also $260-$330 roughly. There is also the D-Link DCS-932L VGA camera where you could do generic rtsp and probably could pick up for $50-$100. Anything else out there you might recommend. Wired cameras i know you could get some inexpensive analogs + encoder or I even saw a Dahua 1.3mp IP onvif camera in Avigilon and it was like i think $160 roughly. Or any other home residential designs out there using Avigilon? I'm thinking just an i5 or i7 server would be just fine as well. thanks, cliff Share this post Link to post Share on other sites
thewireguys 3 Posted January 10, 2013 FYI a i5 or i7 is way overkill for Avigilon. Dahua is supported with Onvif but Dahua is still running a older version of Onvif that does not support motion detection so the cameras will record 24/7 RTSP does not have motion detection so your cameras will record 24/7 lastly you are asking for trouble running cameras wirelessly and remember you need power so you might as well just run the cables. Share this post Link to post Share on other sites
ssmith10pn 0 Posted January 18, 2013 I-3 Processor Win7 64bit and 8Gig of Ram and you can run the world. I'm running a Intel Core 2 Quad Q8300 @ 2.50GHz Yorkfield 45nm Technology 4.00 GB Dual-Channel DDR2 @ 401MHz ASUSTeK Computer INC. P5QL/EPU (LGA775) 512MB GeForce 8400 GS 977GB Seagate ST31000525SV ATA Device (SATA) 28 °C 977GB Seagate ST31000525SV ATA Device (SATA) 28 °C 1465GB Seagate ST31500341AS ATA Device (SATA) 30 °C 1465GB Seagate ST31500341AS ATA Device (SATA) 31 °C Two 2MP Avigilon H264 One 5MP Jpeg 2000 One 2MP Jpeg 2000 1 Encoder with 4 analog cameras 14% CPU and 69% Memory My recording goes back to October 24th Share this post Link to post Share on other sites
