Help with ptz cameras

[troy6363 0]

Heys guys. In need a little help. I will be doing a project on a church. I will be doing two varifocal 2.8-12mm bullet cams and two ptz cams. With the ptz I will be using cat5 and rg59 on the bullet cams. Will this cause a problem? Any suggestions on which baluns to use? I will be using a ptz controller in conjunction with the dvr. Rs485 has positive negative right? Do these go into the controller and the dvr? Will they be able to ptz the cams remotely?

[sonyfcb 0]

Heys guys. In need a little help. I will be doing a project on a church. I will be doing two varifocal 2.8-12mm bullet cams and two ptz cams. With the ptz I will be using cat5 and rg59 on the bullet cams. Will this cause a problem? Any suggestions on which baluns to use? I will be using a ptz controller in conjunction with the dvr. Rs485 has positive negative right? Do these go into the controller and the dvr? Will they be able to ptz the cams remotely?

 

Hi

You only need to connect RS485 of controller to speed dome .

Rs485 has + (A) and - (B ) , connect same to speed dome's

you do not have to connect rs485 to DVR .

And you shall set the address of the speed dome by switcher .

Before you control the speed dome , select Cam 1 or 2 .

If any question , send it by email

Philip

VidoCanada@gmail.com