seaotter69 0 Posted January 14, 2013 Hi all, new to site. recently fitted a 6 camera setup via kgauard h.264 dvr pack. only has 1 vga output, works great with 1 screen but used a splitter to run a second screen, but now has rolling blackish lines on both screens. is this just cos of low signal from splitting the one output ? and will a signal booster cure the problem ? kind regards steve. Share this post Link to post Share on other sites
GrouchoBoucho 0 Posted January 14, 2013 i assume you used one of these? yes, splitting the signal this way will cause problems, as each monitor is only getting half the signal level. use an *active* splitter instead. http://www.screencapturenews.com/2009/10/15/vga-splitters-explained-active-or-passive/ Share this post Link to post Share on other sites
seaotter69 0 Posted January 14, 2013 yes you are correct, thought it might be the case, cheers for confirming this. Share this post Link to post Share on other sites
tomcctv 190 Posted January 14, 2013 hi. around $20 ...... are monitors in same location Share this post Link to post Share on other sites