roger phellps 0 Posted January 14, 2013 Hello, Having a little trouble trying to figure this out. The Error is: "Reboot and select proper boot device or insert boot media in selected boot device" The steps I have took are, 1: The BIOS will sucessfully flash 2: The Recovery will sucessfully run. 3: I have tryed installing new drives. Same out come. 4: I have messed with the jumpers on the drives. Same out come. 5: I have also tryed installing a completely new motherboard. Same out come. 6: I can still acess the BIOS and have tryed a couple of different things and I just can't seem to get passed this error..... Any help would be great! Thanks, Roger P. Share this post Link to post Share on other sites
aibudo 0 Posted January 15, 2013 How did the format go, when you installed the new drives? Dennis Share this post Link to post Share on other sites
roger phellps 0 Posted January 15, 2013 That is the odd thing. Everything downloaded successfully. There wasn't any hang ups or errors. But it doesn't seem to be sticking. I've tried formatting 3 different drives and I am unable to get past that error. I can get into the BIOS, but beyond that I can’t get to windows.... Thanks, Roger Share this post Link to post Share on other sites
tomcctv 190 Posted January 15, 2013 Hi. Have you set a partition on master drive to hold operating software. Share this post Link to post Share on other sites
roger phellps 0 Posted January 15, 2013 I havn't. I will give that a shot. Share this post Link to post Share on other sites
tomcctv 190 Posted January 15, 2013 I havn't. I will give that a shot. hi. another quick test to try....... load software onto removerble hard drive .........then under BIOS select that drive as master boot Share this post Link to post Share on other sites
aibudo 0 Posted January 15, 2013 I may have missed something. Did you start getting this error right out of the blue on the original hard-drive or did it start after installing a replacement hard-drive? Dennis Share this post Link to post Share on other sites
roger phellps 0 Posted January 15, 2013 Tomcctv: I have tried to load the software, and selected the drive as the master boot. Same out come aibudo: I received this DVMS with a defective motherboard. I replaced the motherboard with a new one which is the same model of the defective motherboard that I pulled from the DVMS. After installing the new motherboard is when I started getting this error. So I RMA'ed the new motherboard and received another board which I installed, and continued to receive the error I am currently getting.... So in a short description I started getting this error after installing a new motherboard. Does that make any sense?? Thanks, Roger Share this post Link to post Share on other sites
roger phellps 0 Posted April 1, 2013 The ultimate issue was that the drives were not formatting correctly. Normally, and in most cases you run the recovery which sets up the drives how they should be. That was not working. What I ended up doing was, I created an adapter to connect the hard drive to my desktop computer, and had to format the drive that way. Reinstalled in the Intellex and it worked. Share this post Link to post Share on other sites
aibudo 0 Posted April 1, 2013 Thanks for the reply and fix. So many times, there is a repost to state whether or not the issue was corrected or not and what the ultimate fix was. Dennis Share this post Link to post Share on other sites