ljarrald 0 Posted January 18, 2013 Hi, we have a site with a 9ch DS2 DVR and keyboard fitted, 8 statics, one PTZ. - none of it installed by us. we need to mask off some of the PTZ's view. every single PTZ i've come across so far has the option to do this digitally so i assume this one does too. the PTZ is made by dedicated micros (DM) (as is the DVR and keyboard) but i'm unsure of the model no as its impossible to get to it without erecting a platform. i couldn't even find a way to get into the cameras menu (assuming it has one) let alone program masking! is there a way to digitally mask areas, or will we have to put some gaffa in the housing (which would be a pain to do)? Thanks in advance! -Luke Share this post Link to post Share on other sites
Numb-nuts 1 Posted January 19, 2013 Hey Luke How are you doin' ? In my limited experience of PTZ domes the masking is done via the OS menu. Usually you can do this from the keyboard by accessing the OSM by typing in Call+64+enter (this is a fairly common command but, may be different on DMs ) then you would use the joystick or movement controls to select menu items. Then there are different types of keyboard that do not have the enter key on which case you just call the preset to enter the menu and call+ hold down the preset key to exit. Hope this give you something to work with Share this post Link to post Share on other sites
