Jomadav 0 Posted January 19, 2013 Greetings all, newbie here. I am having a somewhat normal experience ( from what I've seen in other posts here) - I cannot get my PTZs to drive. They have great video via NVT and clean 22/2 w SHLD for RS-485. I have gone through the dip settings, NVR setup menu for the Serial setup regarding the PTZs. I have read to use Green and and yellow on the Cam tied to T+ & T- on the RS-485 block on the NVR. Does anyone have a "tried and true" setup procedure for this ? I have 4 of the 574's and I can make them whatever number I need to as long as they work. Any help is appreciated. Share this post Link to post Share on other sites
Kawboy12R 0 Posted January 19, 2013 Hey Jomadev. Good luck with the PTZs. I've never used them so I can't help there. I was just thinking that if you wanted a unique avatar that you might want to change the flashing lights. That one's been used and seen on here thousands of times by an old time poster although he hasn't posted on here in a while. Share this post Link to post Share on other sites
Jomadav 0 Posted January 19, 2013 Thanks for the offer. It matches my other forum memberships. No help on PTZs though? Share this post Link to post Share on other sites
Kawboy12R 0 Posted January 19, 2013 Not from me. Lots of others on here have PTZ experience though. Share this post Link to post Share on other sites
Jomadav 0 Posted January 26, 2013 So the PTZs are still misbehaving. The question is still out there, can anyone offer any suggestions? Share this post Link to post Share on other sites
rickymok 0 Posted April 9, 2013 You can change the controller by using a single coaxial interface camera controller. Share this post Link to post Share on other sites
