Help Needed with Samsung PTZ controls through DVR

[Fluke 0]

Hello All

 

I have the following Kit

 

1. Samsung SPC-1010 controller

2. Samsung SRD-1650 DC DVR recorder

3. Samsung SCP-2370 THP Camera

 

I can connect the controller directly to the camera and all PTZ functions work correctly.

 

What I need to do is connect the controller to the DVR and the camera into the DVR, so effectively i send the ptz command to the DVR which in turn sends it to the camera. (this way we can extend the system to multiple camera and control all cameras)

 

I believe the camera is one which uses the coaxial to transmit the PRZ commands.

 

ON THE DVR I HAVE THE FOLLOWING:

 

TX + & -

RX + & -

 

on the controller there is

 

TRX + & -

TX1 + & -

TX2 + & -

TX3 + & -

 

So how do I connect the the Controller to the DVR?

[sonyfcb 0]

Hello All

 

I have the following Kit

 

1. Samsung SPC-1010 controller

2. Samsung SRD-1650 DC DVR recorder

3. Samsung SCP-2370 THP Camera

 

I can connect the controller directly to the camera and all PTZ functions work correctly.

 

What I need to do is connect the controller to the DVR and the camera into the DVR, so effectively i send the ptz command to the DVR which in turn sends it to the camera. (this way we can extend the system to multiple camera and control all cameras)

 

I believe the camera is one which uses the coaxial to transmit the PRZ commands.

 

ON THE DVR I HAVE THE FOLLOWING:

 

TX + & -

RX + & -

 

on the controller there is

 

TRX + & -

TX1 + & -

TX2 + & -

TX3 + & -

 

So how do I connect the the Controller to the DVR?

 

Hi

You can u connect your speed dome as current .

And Use TX2 TX+ to DVR RX+

TX2 - to DVR RX-

RX+ to DVR Tx+

RX- to DVR TX-

Hope it works .

Philip

Skype : Philip.vido

Vidocanada@gmail.com

[machiner 0]

Keyborad SPC-1010 not support control DVR. Keyborad SPC-1010 support only control cameras through RS485 connection.

 

If You want use COAXIAL connection (PELCO C) with PTZ cameras (with W5 or SV-5 processor) and SRD-1650DC than You must use SPC-6000 keyboard.