DDNS Issue Remote viewing

[nicksti 0]

Setup:

 

ADSL Modem - 192.168.0.1

Computer A (connected wired to ADSL Modem) - 192.168.0.100 | 255.255.255.0 | 192.168.0.1

Wireless AP (connected to ADSL Modem)

Computer B with Wired LAN and Wireless

- Wireless connected to AP - 192.168.0.78 | 255.255.255.0 | 192.168.0.1

- Wired set up using Internet Connection Sharing - 192.168.137.1 | 255.255.255.0

IP Cameras connected to Wired LAN given IP Addresses 192.168.137.160 - 170

 

The cameras are all working. The internet on all the computers are working. But I am now trying to set up remote viewing and I hit a bunch of issues.

 

1. Computer A and B cannot ping each other. But they each can ping 192.168.0.1

2. On Computer B when I go to 192.168.0.78 I get to the DVR Admin page.

3. On Computer B when I go to 192.168.0.1 I get to the Modem Admin page.

4. On Computer B when I go to 192.168.137.1 I get to the DVR page.

5. On Computer A when I go to 192.168.0.1 I get to the Admin page.

6. On Computer A 192.168.0.78 goes nowhere.

 

I signed up for a DDNS service.

1. On Computer A when I go to mycams.no-ip.org it sends me to my modem login which works

2. On Computer B when I go to mycams.no-ip.org it sends me to my modem login which works

3. When I use a computer outside of the network mycams.no-ip.org goes nowhere

 

I have no clue what I am doing wrong. Help?

[aibudo 0]

Sounds like that you're not using your outside IP address. Are you using the address that you get when in your network and going to "whatismyip.com" in your browser? Now you can't use that address when in your network. You must be at another location. Don't know about the ".78" issue when in your network, but the remote access isn't possible when using the "192." addresses. You do, of course, have to port forward the required ports for remote access through your router.

[Ct-DVR.com 0]

when you register at no-ip , you need to register the the external Ip address of your system , not 192.168 etc, go to google , type what is my Ip , click the first site and thats the address your register, then you have to forward the correct ports for your cameras to the address of the camera, so if your cam is 192.168.1.120 , and port is 8000 , you have to go into your router and forward 8000 to 192.168.1.120 , then go to no-ip and see if it asks for a port number , so you put in a port number and external address, once thats done and the port is open should work fine.