Devendra Maske 0 Posted February 18, 2013 Hello guys, I have the problem about the setting for remote view. Here is the list of my device info: Dahua DVR 3106 (192.168.1.103, port HTTPS:-80 TCP:- 37777 UDP :-37778) ZyXEL Modem IP (192.168.1.1) Dynamic IP Public : 114.143.XXX.XXX I already done setting for port forwarding on my modem using this configuration: TCP: - 37777 UDP: 37778 HTTPS:- 80 After this settings DVR start working on Laptop, Samsung S3 and Samsung note ( Using GDMSS) in local wi-fy network when I type the address 192.168.1.103 (in mobile I set port as a 37777when i type 36.73.XXX.XXX:8080, But when I type public IP 114.143.XXX.XXX:80 or :37777 , its displayed modem Login page but not DVR page. When I type 192.168.1.103:37777 or :80 then IE could not find any page. Then I tried to use no-ip service and register domain name. Open the network settings in DVR and enable DDNS service. Select NO-IP in DDNS and not change server address. I typed domain name which is given by NO-IP In Username and password I type admin. I type domain name (---------.No-IP.COM) in web address bar and enter but again same error displayed that “page not displayed” Anyone can help me with this problem ? is there something that i miss ? I need to open DVR through gDMSS in my Samsung phone in public network. Devendra dev.maske@gmail.com Share this post Link to post Share on other sites
Securame 0 Posted February 18, 2013 Change port 80 to something else; many routers do not like outsiders trying to connect to port 80 (their web interface port). Share this post Link to post Share on other sites