90beater 0 Posted March 6, 2013 (edited) Hi I just recieved two of the Q-See QCN7001B cameras from Costco and I can't get into the http server on them. They did not come with the software disc and quick start guide in the boxes. I have them connected to a POE switch and are getting power. I downloaded configtool and I can see and login to them from there. I did a reset to factory using the switch. I can ping them but I can't see them in IE9, I just get a page not found using http://192.168.1.125 (The IP address they are given). I also tried PSS but it just says login invalid when I try to login to them using the default admin password. They have software ver 2.100 Build 2012-12-7. I also tried connecting a laptop to the same switch with the POE turned off and get the same results. Is there something I am missing? Edited March 10, 2013 by Guest Share this post Link to post Share on other sites
ajafar 0 Posted March 6, 2013 The url should be http://:85/ Q-see has the default http port on 85. Share this post Link to post Share on other sites
90beater 0 Posted March 6, 2013 Thank you so much. That did it. I have been going nuts since the q-see site links to thier software and manuals isn't working. I spent a few hours trying to figure it out myself. Share this post Link to post Share on other sites