kmdcomp 0 Posted March 6, 2013 Hi all, I'm having some trouble with a c2-4408 from SCW. When the user is viewing the cameras through the web GUI and has more than 3 cameras up at a time, the video starts to lag, sometimes as long as 2 to 3 minutes behind the actual time. Has anyone encountered this before? UPDATE: I just ruled out a networking problem. I hooked it directly to the workstation with a crossover cable and still had the same issue. Next up, install a 10k RPM drive and see if the current HDD is the bottleneck Share this post Link to post Share on other sites
aibudo 0 Posted March 6, 2013 If you do have an issue like that outside the network, it will probably be a bandwicth issue with the ISP. Have been down that "road" before. That last time was with a 16 channel system and only 9 to 11 camera's would come up. Never new how many exactly, but then I had the "jip-jump" of video that you are describing. If I would shutdown a few of the camera's, then the video would "smooth" out. Dennis Share this post Link to post Share on other sites