gcbailey 0 Posted March 10, 2013 I have a Revo branded CCTV DVR that I am trying to get to work together with my Dish Network receiver (ViP 222) that are on two separate floors. The CCTV has a video out that I'm going into a modulator. Right now I've got a second coax line going from the modulator into the back of the ViP 222 into the antenna in. I cannot get the modulator (ch 3) to show up on the TV any way. I don't know if there is some setting on the receiver besides the local channel auto program or not that I need to set. I have also tried coming out of the modulator going into a second diplexer. I can get this to work, however the satellite feed (ch 60 remote TV) is somewhat snowy. If it matters, I'm trying to view the CCTV on the TV 2 feed from the satellite. TV 2 is the bedroom, TV 1 is main floor (satellite receiver located), CCTV and satellite feeds are located in the basement I don't know if this is the right forum or not, but hopefully someone here can shed some light on what I need. thanks!! Gary Share this post Link to post Share on other sites
h8that4u 0 Posted March 16, 2013 Try coming out of the modulator, with a coax line to a splitter (going to one of the outs), then the line coming from the back of the DN 222 receiver that is feeding the tv 2 output will go to the other out on the splitter. Then run a line from the splitter in to the diplexer uhf. Share this post Link to post Share on other sites
