securindo 0 Posted March 10, 2013 (edited) Hi All, Hope you doing well. Today I tried to install GV-Keyboard V3 to FLIR F-Series thermal camera but it does not work. Camera is using serial RS-422 protocol. Anyone can help me how to wire/connect the serial pin from keyboard & camera? how many cable require to run RS-422 ? attachment manual electrical connections & schematic FLIR F-Series camera and a drawing pin (terminal block wall) of the GV-keyboard. Much appreciate ! Thank You Teddy Edited March 10, 2013 by Guest Share this post Link to post Share on other sites
tomcctv 190 Posted March 10, 2013 Hi. to get it working on camera (serial connection) pin 1 needs to connect to terminal 5 on wall plate and pin 2 needs to be connected to terminal 1 on wall plate. you dont need the rest Share this post Link to post Share on other sites
securindo 0 Posted March 10, 2013 Hi. to get it working on camera (serial connection) pin 1 needs to connect to terminal 5 on wall plate and pin 2 needs to be connected to terminal 1 on wall plate. you dont need the rest Thanks Tom ! I will try it tomorrow morning. Hopefully it work. additional information attach manual keyboard 2 support RS422. Teddy Share this post Link to post Share on other sites
securindo 0 Posted March 11, 2013 TOm, Thank you !! WORK WELL.. Share this post Link to post Share on other sites