Remote viewing help

[27901591 0]

Can anyone help me set up remote viewing please, I've tried yet failed on many tries, I have attached a DVR menu, router menu, mobile phone app menu, and I have also set up a dyndns account (don't get how that fits into any of the menus other than the DVR one)

[clarkep 0]

in the port forwarding image you sent you have not set up to forward all the ports to your cctv as it shows in your network setup page image of your cctv system where it says server port and mobile port you need to froward these and the http port using your router to your cctv so for example if you cctv system is listed as 192.168.1.68 as its internal ip on your router then you will need to forward the server port 1 , mobile port 1 and http port 80 to your cctv system 192.168.1.68 so yours will go more or less like this

port range will be 1-1 tranlate to will be 1-1

tcp 1-1 1-1

udp 1-1 1-1

tcp 80-80 80-80

udp 80-80 80-80

like i have done in mine although i changed my http port from 80 to 1234 have a look at my images

 

 

 

so your private ip will be the ip of your cctv system your protocol type will be all public start port will be 1-1 public end port will be 1-1

 

then do the same forwarding http port 80 your protocol type will be all public start port will be 80-80 public end port will be 80-80

 

then you need to type in your external ip address of your internet by going to http://www.whatsmyipaddress.org and getting your ip address if you have a dyndns ip then use that

 

 

you just need to remember if you are using internet explorer to view your camaras you will need to download the activex controls for remote viewing then type in the ip in address so for example if your external ip is 182.173.65.124 then in address bar type the following with the http port at the end http://182.173.65.124:80/ it is the same for your dyndns account type in the address eg i thing your in the image is http://newageplumbing.dyndns.org:80/ type that into the address bar after down loading the active x controls but to download the you go to iternet options and security custom level and get the following enable all 3 then type in ip http://newageplumbing.dyndns.org:80/ and install activex controls to get the cameras come up if it works this way then it should work on an app on your phone by typing in the correct information in the correct boxses.

 

although our cctv systems are different as min is a pc based cctv system and i cannot get my cctv on a phone yours should be different if you have been told you can use that app to pull up your cctv then if your cctv works through the internet explorer from doing what i told you it should work on your app on your phone once you type the correct info into each box on the app

[27901591 0]

Thank you for the detailed reply, I shall try this tonight and update you sometime tomorrow. Once again thank you.