bpzle 0 Posted March 23, 2013 I have opened ports 80, 554, and 443 with success. Unfortunately I can only get the MJPEG refresh to work remotely. Are there additional ports that need to be opened up for the encoder? Thanks Share this post Link to post Share on other sites
gilligan 0 Posted March 23, 2013 Some ISP's block certain ports... port 80 is almost guaranteed to be blocked on residential internet accounts. Share this post Link to post Share on other sites
bpzle 0 Posted March 23, 2013 I am familiar with that.... my external ports are different. thanks Share this post Link to post Share on other sites
bpzle 0 Posted March 23, 2013 to clarify the http page works fine remotely just not stream 1 or 2 Share this post Link to post Share on other sites
gilligan 0 Posted March 23, 2013 Odd as it sounds I had problems with my Dahua NVR when I wasn't forwarding 1:1. So I couldn't forward 5580 to 80 or 33333 to 37777. I had to be 5580 to 5580 and 33333 to 33333. Maybe something similar? Share this post Link to post Share on other sites
machiner 0 Posted March 24, 2013 #1 Try add port 1756 #2 Check Video transmission in Network/Network...Details.... Change to TCP (HTTP port) #3 Instal decoder in IE or use BVC 1.4 SR1 with MPEG ActiveX 4.40 Good Luck Share this post Link to post Share on other sites
