Multi Channel Capture Card compatible with XSplit

[skewcrap 0]

Hi everyone

 

Im quite desperate, I tried finding a solution for my problem, but even after more than 10 hours of research I could not find any.

 

I want to create poker videos with 10 cameras. For this I want to use Xsplit or a similar software. For this purpose I need a capture card for 10 channels, either 2x8 or 1x16 channels. I already have analog cameras and a capture card.

 

The card I have is the following one: http://www.dinodirect.com/card-dvr-v...-pal-ntsc.html

 

I have access to the cameras, but only with the software from this site: http://www.camsecure.co.uk/MiniPCIE.html

Actually it is not the original software (which does not work with win7), but it works since the cards on the site are different from the one I have but have the same chip (Conecant CX 25853).

I have no access to the cameras with other software such as Xsplit, even the card is recognized in Windows.

 

So, I am looking either for a solution to make the card I have working with Xsplit or other third party software, or the alternative is to buy another card which is supported by Xsplit. Is there any possibility to make the card working? Is it difficult to adapt the driver?

 

Or if not, how can I find a card that works? The information about those cards in the net is really sparse and since I can not spend more than 200$ for the card the really good ones with documentation fall apart. In the Xsplit forum I could not find any information that is usefull for me.

 

What is the requirement for a capture card to work with 3rd party software? Is it enough if there is a WDM driver for windows?

 

I hope anyone can help me!

 

Thanks a lot!

 

Regards

 

skewcrap