carlosperin 0 Posted May 7, 2013 My DVR is a Avtech DR-082z After the firmware update failed, every time I turn on my DVR, I can see the next screen … and the DVR get stuck there. As I was told, using the firmware ftp://211.75.84.102/Firmware/DR082_1013.rar … I followed the instructions shown in **** http://www.pushvideoclub.com/viewtopic.php?f=99&t=163 *** Following the above instructions I can say: 1) I don’t have any of the COMPATIBLE USB FLASH DRIVE so I used • 4GB Imation Nano USB Device • 2 GB Verbatin TUFF N TINNY USB Device 2) In my USB I tranfered the next files (RAR Archive, RAR archive uncompressed in 1013-1004-1008-1004 Directory and RAR archive uncompressed in ROOT Directory) 3) When making the chip resistor short-circuited, I “NEVER” hear the BEEP, but I can see the next screen: And the DVR get stuck there. 3) Questions: • Am I making something wrong? • Is the problem the USB Flash I am using it? (I could never see the Screen showed in “STEP 4” • Does this DVR only works with a limited number of USB Drives? Please, help me to find a solution Share this post Link to post Share on other sites
allansm 0 Posted February 11, 2021 On 5/7/2013 at 10:47 PM, carlosperin said: My DVR is a Avtech DR-082z After the firmware update failed, every time I turn on my DVR, I can see the next screen … and the DVR get stuck there. As I was told, using the firmware ftp://211.75.84.102/Firmware/DR082_1013.rar … I followed the instructions shown in **** http://www.pushvideoclub.com/viewtopic.php?f=99&t=163 *** Following the above instructions I can say: 1) I don’t have any of the COMPATIBLE USB FLASH DRIVE so I used • 4GB Imation Nano USB Device • 2 GB Verbatin TUFF N TINNY USB Device 2) In my USB I tranfered the next files (RAR Archive, RAR archive uncompressed in 1013-1004-1008-1004 Directory and RAR archive uncompressed in ROOT Directory) 3) When making the chip resistor short-circuited, I “NEVER” hear the BEEP, but I can see the next screen: And the DVR get stuck there. 3) Questions: • Am I making something wrong? • Is the problem the USB Flash I am using it? (I could never see the Screen showed in “STEP 4” • Does this DVR only works with a limited number of USB Drives? Please, help me to find a solution Share this post Link to post Share on other sites
