Pelco Digita Sentry Recording Issue

[jimmymanalo 0]

Hi There,

 

I have a Pelco Digital sentry NVR (DSSRV-15TB)

 

I am having issues with the duration of my recording, I have 24 analogue cameras connected to ENCL encoder that comes along with DSSRV NVR as direct attached encoder, and 8 IP sarix 1.5 Mp cameras. The NVR has 15TB recording capacity.

 

My problem is the client requires a 90 days continues recording but I was able only to record at 30 days only, what could be the reason why it is not able to record 90 days?

 

For your information here is the configuration set-up at site:

 

At DS Admin:

 

1. Storage configuration is set to " force video to delete after 90 days"

2. Recording video resolution is at "medium" only

3. Storage rate is 12 ips only

4. Motion event is "disabled"

5. Cameras are at 2CIF only

 

As per the pelco storage calculation, the DSSRV 15TB can record (continues) 61 cameras at this rate.

 

What could possibly have gone wrong?

 

I would appreciate any help or assistance, thank you.

[tomcctv 190]

Hi. which compression are you using. H264 or mjpeg. H264 will give a lot more days and also allow you to run cameras better than 2cif

[ChrisL 0]

Are these Pelco IP cameras?

[jimmymanalo 0]

Hi. which compression are you using. H264 or mjpeg. H264 will give a lot more days and also allow you to run cameras better than 2cif

 

Hi Tom, Compression is H264, 2CIF was required by the client

[jimmymanalo 0]

Are these Pelco IP cameras?

 

Hi Christ, Yes, 8 numbers of pelco IP Sarix 1.3 Mp cameras plus 24 Analogue Cameras connected to pelco direct attached -ENCL5416 encoders, all dome type.

[jimmymanalo 0]

Hi,

 

I have a 2 nos.Pelco DSSRV RD NVR and 1 no. Work Station PC, I am currently monitoring my 2 numbers of Pelco DSSRV on a Work Station PC but all camera timings are not synchronized for both NVR and my PC.

 

I want to synchronized the live view time in GUI for both NVRs and my work station PC.

 

Thank you for the help.