phico 0 Posted May 17, 2013 Hello, I have a Dahua IPC-HFW2100 linked to zoneminder by the ffmpeg stream .. A some time I get corrupted images from Dahua which trigger motion detection on zoneminder for nothing .. (see below) Do you have any idea how to avoid this ? Thanks Share this post Link to post Share on other sites
Dâniel Fraga 0 Posted May 17, 2013 Hello, I have a Dahua IPC-HFW2100 linked to zoneminder by the ffmpeg stream .. A some time I get corrupted images from Dahua which trigger motion detection on zoneminder for nothing .. (see below) Do you have any idea how to avoid this ? Thanks Sometimes I noticed this on mine too... Maybe they corrected it in the new firmware (20130313), but the problem is that the new one will not record to FTP. Share this post Link to post Share on other sites
phico 0 Posted May 18, 2013 Thanks .. great to know ! I changed ffmpeg for avconv and I think I get it less often now .. but it is still there. You can use rstp with a motion detection software like zoneminder instead of ftp Share this post Link to post Share on other sites
phico 0 Posted May 18, 2013 my firmware is 2.100.0001.0.R, build : 2012-10-31 where did you find yours ? Share this post Link to post Share on other sites
Dâniel Fraga 0 Posted May 18, 2013 my firmware is 2.100.0001.0.R, build : 2012-10-31where did you find yours ? I got it from my reseller (Empire Security) but I don't recommend the new firmware, unless you don't need FTP recording (it's broken on the new firmware). Share this post Link to post Share on other sites
phico 0 Posted May 19, 2013 Hello, I do not need FTP but I need a working rtsp stream ... otherwhise this webcam is completely useless for motion detection !! Do you still have corrupted frames with the new firmware ? Share this post Link to post Share on other sites
Dâniel Fraga 0 Posted May 19, 2013 Hello, I do not need FTP but I need a working rtsp stream ... otherwhise this webcam is completely useless for motion detection !! Do you still have corrupted frames with the new firmware ? I didn't notice corrupted frames. With the new firmware, the rtsp stream is ok, but I had to remove the "/cam/realmonitor" part in order for it to work. Share this post Link to post Share on other sites
phico 0 Posted May 19, 2013 (edited) Thanks, I found a workaround .. I setup my motion detection software (zoneminder) to trigger only if at least 2 frames are alarmed frames .. As those corrupted frame are single the motion detection is not triggered anymore What is great is that it also solved my bugs (insects) attract by PIR and rain drops problems !!! Edited May 19, 2013 by Guest Share this post Link to post Share on other sites
Dâniel Fraga 0 Posted May 19, 2013 Thanks, I found a woraround .. I setup my motion detection software (zoneminder) to trigger only if at least 2 frames are alarmed frames .. As those corrupted frame are single the motion detection is not triggered anymore What is great is that it also solved my bugs (insects) attract by PIR and rain drops problems !!! Great workaround Congratulations! Share this post Link to post Share on other sites
phico 0 Posted May 20, 2013 Grrr ... I still have corrupted frame events because they are not all single frame .. some have up to 8 frames .. Anybody can help ? I tried VBR instead of CBR but it does not change anything .. Another picture of the problem bellow (I masked in white neighbour house!) Share this post Link to post Share on other sites
Kawboy12R 0 Posted May 21, 2013 You guys consider that it might be a network problem corrupting or losing the packets after they leave the camera? Share this post Link to post Share on other sites
phico 0 Posted May 21, 2013 Hello, Good news concerning this corrupted frames issue ... I upgraded to latest firmware yesterday evening (2.210.0000.0.R, build : 2013-03-13) and I have not getting corrupted frames for one day .. so I think it definitevely solved the issue ... And in the same time I have no activex problem in web interface anymore .. I read that new firmware has problem with FTP records but I am not concerned about . So it is ok for me. Share this post Link to post Share on other sites
Dâniel Fraga 0 Posted May 21, 2013 Hello, Good news concerning this corrupted frames issue ... I upgraded to latest firmware yesterday evening (2.210.0000.0.R, build : 2013-03-13) and I have not getting corrupted frames for one day .. so I think it definitevely solved the issue ... And in the same time I have no activex problem in web interface anymore .. I read that new firmware has problem with FTP records but I am not concerned about . So it is ok for me. Good for you I would like very much to use the new firmware, but as I depend on ftp, I can't... I hope Dahua fixes the FTP issue on the next firmware. Share this post Link to post Share on other sites
phico 0 Posted May 22, 2013 I can try with my camera if you want .. what exactly is not working ? Share this post Link to post Share on other sites
Dâniel Fraga 0 Posted May 22, 2013 I can try with my camera if you want .. what exactly is not working ? The FTP recording is not working. Share this post Link to post Share on other sites
cgcmgr 0 Posted May 23, 2013 Hello, Good news concerning this corrupted frames issue ... I upgraded to latest firmware yesterday evening (2.210.0000.0.R, build : 2013-03-13) and I have not getting corrupted frames for one day .. so I think it definitevely solved the issue ... And in the same time I have no activex problem in web interface anymore .. I read that new firmware has problem with FTP records but I am not concerned about . So it is ok for me. ------------------------------------------- Do you know where I can get the new firmware (2.210.0000.0.R, build : 2013-03-13)? I can't seem to find it. Chris Share this post Link to post Share on other sites
jpaulwhite 0 Posted July 22, 2013 Hello, I have the Duahua IPC-HFW2100 and I also have the corrupted screen issue. One caveat is that I am running the firmware mentioned above (2.210.0000.0.R, build : 2013-03-13) I am running Firefox 22 on a PC. If I look at the image using the Duahua software the image is fine. I am using the same RTSP url and using FFMPEG Share this post Link to post Share on other sites
