kikomachado 0 Posted May 25, 2013 Hi everyone, I´m new in this forum and i have a problem that i thing you can help. I have an AVC 781 that are blocked and when i search on internet for a reset i found an images and manual how to reset on board but in my hardware i don´t have the jumper to do this. Can anyone help with this? Thank you! Model: AVC781Z REV0.4A 2006/1/24 Share this post Link to post Share on other sites
leokingsly 0 Posted May 28, 2013 Hi everyone, I´m new in this forum and i have a problem that i thing you can help. I have an AVC 781 that are blocked and when i search on internet for a reset i found an images and manual how to reset on board but in my hardware i don´t have the jumper to do this. Can anyone help with this? Thank you! Model: AVC781Z REV0.4A 2006/1/24 1.Remove the DVR cover and find the chip resistor to reset the hardware 2.The chip resistor is located on TP5 and TP6 3.Disconnect the DVR power. Then, make the chip resistor short-circuited with a conductive object (such as forceps) as indicated below, and re-connect the power. Remove the conductive object when you hear a short beep sound, and wait till the DVR reboots. Share this post Link to post Share on other sites
