ajackson 0 Posted December 1, 2005 I was able to obtain a GE Smarthome camera that was intended as an add-on to their systems. Model GESECCTVBWC...unfortunately I have been unable to find out what voltage to use. I assume the center pin of the power plug is the positive but not certain of that either. Any help would be appreciated. Thanks, Art Share this post Link to post Share on other sites
rory 0 Posted December 1, 2005 Never heard of it until now .. anyway, which one is it? Which power lead, the camera or the transformer? Generally the center is positive and the outer is negative, from looking at one of them it is 12VDC, but need a model number to be exact. http://www.geconsumerproducts.com/smarthome/prod_0_1.htm Share this post Link to post Share on other sites
ajackson 0 Posted December 1, 2005 I need the power requirements for the GE camera model# GESECCTVBWC. This is intended as an add-on B & W camera for their SmartHome video system. I plan to use it in an existing system (non-GE) in my home. I just need to know the voltage/current requirement of the camera. Regarding the power connector on the camera, I'm assuming the center pin is the positive as you suggest. thanks, Art Share this post Link to post Share on other sites
ajackson 0 Posted December 1, 2005 Rory, mine is the wired version of the Smarthome camera's. I don't see them listed...must have been discontinued. Share this post Link to post Share on other sites
