notchy 0 Posted June 23, 2013 I have a question in regards to installation of swann hd-820cam 1080p ir bullet under the ease of my garage overhang. Could anyone chime in on how to remove the eaves so I can do a couple of things. 1. install a 2X4 for to mount the camera to it if there is no wood in that area. 2. I would then run the cat5e ethernet wire into my garage which leads to my basement where I have my switch. I have a link to pics. 2 - pics shows the close up of where I wanted to mount the camera (circled in RED)and the other pic is a bigger shot of the house and the location of where I would mount it (circled in RED). Approximte location Iwanted to install the The big picture of the location of the camera. I need it to monitor my driveway. Would this be a good position? Does anyone have any recommendations of another location along the eaves of the garage overhang? Share this post Link to post Share on other sites
SectorSecurity 0 Posted June 23, 2013 Might find this link helpful http://www.diychatroom.com/f9/how-gently-remove-aluminum-soffit-52437/ Share this post Link to post Share on other sites
