using pss to tour 4 nvrs

[djadam 0]

Hi Guys,

 

I posted this before in the wrong section..sorry.

I have 4 nvrs on my network. Am i able to see all 4 nvrs on one monitor through some sort of touring with pss?

 

how would I do this?

Thankyou

[dexterash 0]

If you just want to see them all, use a Monitor Task. If you want to tour, use Monitor Tasks + Monitor Project. You can configure them via Scheme Task Config in Settings menu.

 

Also, you can modify the general options and just remember the monitor layout.

 

You can add a channel to a monitor task if you right click on the window of the video.

[vector18 1]

Hi Guys,

 

I posted this before in the wrong section..sorry.

I have 4 nvrs on my network. Am i able to see all 4 nvrs on one monitor through some sort of touring with pss?

 

how would I do this?

Thankyou

 

 

Download PSS from Dahua website. Add each NVR as a device, than make as many boxes as you want to view that amount

of cameras, and just drag which cameras on which NVR you want and you will be watching all 4 NVRS at the same time.

[shockwave199 0]

And then once you do that, save it as a task so it opens up like that automatically from now on. I haven't made a task in PSS yet, but that's what you should do I believe.

[tomcctv 190]

Hi Guys,

 

I posted this before in the wrong section..sorry.

I have 4 nvrs on my network. Am i able to see all 4 nvrs on one monitor through some sort of touring with pss?

 

how would I do this?

Thankyou

 

 

 

 

Hi forget PSS use link sent in PM

[Securame 0]

Hi forget PSS use link sent in PM

 

If you think he should forget PSS, I would love to see that link too.

 

If for some reason it can not be posted in public, please PM me

[shockwave199 0]

Yeah what's the deal with a private suggestion. I'm open to suggestions too!

[tomcctv 190]

it was just a direct link to dahua DSS software

[dexterash 0]

DSS is way more complicated then PSS, and I would not recommend it for normal/non-distribuited installations.

[tomcctv 190]

DSS is way more complicated then PSS

 

 

 

depends if the OP knows his way around PSS either way it only take 30 mins to work it out.

 

 

I would not recommend it for normal/non-distribuited installations.

 

 

is this not what its for ........................ lots more options than basic PSS ..... add IP at later date ..... better alarms ..... much faster playback

[vector18 1]

I love how the OP hasn't even responded to any of our suggestions.

[shockwave199 0]

You know I'm gonna have to look at DSS. I've always just been using PSS.

[djadam 0]

Hello everyone,

 

Thankyou so much for the replies.....I have been flat out working....Just so everyone know I am an electrician who installs BAS systems and am starting to do security as well.

 

After reading the replies...Monitoring Task is of course what I was looking for.

 

All good now. I did this using PSS scheduling a task ...add name of task and then having each channel fullscreen and adding them one by one.

 

I tried adding all channels at one ..this then makes all the channels come up at once on the screen and doesn't "tour" each screen individually. It just brings them all up on one screen.

 

Thanks again for the replies.

 

Adam

[dexterash 0]

Touring would require a Project with multiple Tasks.

 

@shockwave199: DSS is a Distribuited Surveillance System. In a single-user/single PC mode will complicate things...