mauricefm 0 Posted June 24, 2013 Hello I have Pelco IMS0C10-1 and IES0DN12-0 cameras that detect constant motion in low light. The IE cameras are outdoor, or “partially” outdoor (parking deck stairwell w/light and open wall), the IMs are all indoor. At night or when lights are turned off the cameras record like they are set to 24/7 recording, when are set for motion detect only. When lights are on (or in daylight), motion detection operates fine. If I adjust the settings to prevent this, motion settings in light is adversely affected. Settings vary both by camera and by environment. Any suggestions? moe Share this post Link to post Share on other sites
