icamera 0 Posted July 4, 2013 Does anyone know who sells this housing? Share this post Link to post Share on other sites
thewireguys 3 Posted July 4, 2013 Someone was looking at my twitter feed Share this post Link to post Share on other sites
jeromephone 6 Posted July 4, 2013 look in the Mid atlantic website or rack mount enclosures it may not be the exact one but they will have something close Share this post Link to post Share on other sites
ssmith10pn 0 Posted July 4, 2013 An enclosure for what? Share this post Link to post Share on other sites
icamera 0 Posted July 4, 2013 Thanks. Its an enclosure for a server, patch panel, etc. This is your work thewireguys?? Who makes that enclosure? look in the Mid atlantic website or rack mount enclosures it may not be the exact one but they will have something close Share this post Link to post Share on other sites
hardwired 0 Posted July 4, 2013 It's made by BlackHawk Labs, http://www.bhlpower.com/. Nicely made, I just ordered one for a job where a customer told me they were ready for install, and had a server rack ready. I got there, and it was a two post relay rack about 16 inches off the wall.... Share this post Link to post Share on other sites
icamera 0 Posted July 4, 2013 Thanks. I dont know why it was a big secret... It's made by BlackHawk Labs, http://www.bhlpower.com/. Nicely made, I just ordered one for a job where a customer told me they were ready for install, and had a server rack ready. I got there, and it was a two post relay rack about 16 inches off the wall.... Share this post Link to post Share on other sites
icamera 0 Posted July 4, 2013 This seems like a great enclosure. Its usually easier to surface mount wiring and sometimes an in wall enclosure is not practical or allowed by code (fire penetrations). Share this post Link to post Share on other sites
icamera 0 Posted July 4, 2013 Demo video: http://www.bhlpower.com/index.cfm?page=demo Share this post Link to post Share on other sites
thewireguys 3 Posted July 4, 2013 Yea that is our install. Make sure you order a server that fits the rack. Share this post Link to post Share on other sites
ssmith10pn 0 Posted July 4, 2013 I see a couple of issues. The patch Panel area is going to be tough to terminate. I guess you would have to mount it backward, punch it down then flip it. Rack Mounted Equipment pulls air through the front and exhausts out the back. The optional fans are blowing the opposite direction. If your going to drop a server in there you need square rack holes. Not threaded. Also looks like there isn't enough depth available for a server. Share this post Link to post Share on other sites
thewireguys 3 Posted July 4, 2013 Scott email me if you have questions I have lots of pics. Share this post Link to post Share on other sites
icamera 0 Posted July 4, 2013 Can i ask whats the point of a forum if when someone raises a concern you address it through a PM so that others cant benefit from the information? Scott email me if you have questions I have lots of pics. Share this post Link to post Share on other sites
