Robert Oaks 0 Posted April 10, 2004 I have installed a GEO600 card and software in a brand new custom built computer. When I try to start the Multicam main program, I get the following message: The Ordinal 11 could not be located in the dynamic link library DSOUND.dll. The program will not start. Can someone help me on this? Thank you. Share this post Link to post Share on other sites
qman 0 Posted April 11, 2004 I think that your problem is DirectX, install Version 9.0B and that you should do it. Share this post Link to post Share on other sites
Robert Oaks 0 Posted April 11, 2004 What is the Direct X that you mention, and how does one install it? Thank you. Share this post Link to post Share on other sites
qman 0 Posted April 11, 2004 DirectX is a set of drivers that microsoft made to make hardware and software communicate at a faster speed for "resource intence" applications like games. Download and install here: http://www.microsoft.com/downloads/details.aspx?FamilyID=141d5f9e-07c1-462a-baef-5eab5c851cf5&displaylang=en Share this post Link to post Share on other sites
cctv_down_under 0 Posted April 12, 2004 The latest.. Direct X is on the Geovision disk and the instructions state to load this first.. plus the drivers before the sofware.. I do not think this is your problem though.. I think you forgot to disable your onboard sound card and I fear you may also have not loaded the motherboard drivers? Share this post Link to post Share on other sites
