kmax1940 0 Posted July 19, 2013 Hello, well this url was working at one point but now it says "404 not found". http://192.168.1.121:9988/onvif/media_service/snapshot.jpg The firmware may have been upgraded since I saw this snapshot working but I cant be sure. Here is the current info: Software Version2.210.0001.0.R, build : 2013-05-17 WEB Version3.2.1.105704 Anyone have any info on how to pull a jpg stream from these Dahua 2100 cameras? Share this post Link to post Share on other sites
buellwinkle 0 Posted July 19, 2013 Just open a support ticket with Dahua and they are very good at responding and getting you a firmware update quickly. All kidding aside, I have the same issue on some new cameras and I've tried every possible avenue to get it resolved, emailed their tech guy directly, entered it on their support site, pushed it up through my distributor, and nothing, nada, zilch. Dahua working hard to ignore it's customers. There's no HTTP URL that will get you a stream, it has to be an RTSP stream and that works. You'll have to search around for it or Google this with the quotes - "dahua cgi url api commands" and it will take you to the URL commands manual for Dahua. Share this post Link to post Share on other sites
mroek 0 Posted July 19, 2013 This URL works with my cameras, but they are running a slightly older version than yours: http://<ip-address>/cgi-bin/snapshot.cgi?channel=0 The URL you supplied doesn't work with mine either. Share this post Link to post Share on other sites
kmax1940 0 Posted July 20, 2013 Thanks. They must have moved the url since I used it last. This works for me: http:///cgi-bin/snapshot.cgi?channel=0 Share this post Link to post Share on other sites