CorvairShaggy 0 Posted July 28, 2013 I am working on a older ADT DRC4HS system. I have been able to use the iPhone "ADT Matrix" app and connect to the unit via the IP address of the site and view the cameras. If I connect on to the Wi-Fi at the site then try viewing the cameras in the app,it will not connect. Probably some kind of router (ATT NVG50 U-verse) firewall issue? Also, instead of using a standard DDNS setup, it has a DVRNS setup. According to the instruction manual from tyco-is / matrix (the actual maker of the unit), it says it will work with No-ip.com DVRNS service. I use NO-IP service for seval units I have installed, but I have never seen anything that says DVRNS. On the unit, it does not have a login name/password for the DVRNS service like a standard DDNS setup screen has. Has anyone setup one of these before and can help give me some insight? Thanks! Share this post Link to post Share on other sites
ssnapier 0 Posted July 28, 2013 Not sure if this will help or not, but here it is: http://www.honeywellvideo.com/documents/HRHDDVRNSUserGuide_rev1.01_web.pdf Share this post Link to post Share on other sites
