Jump to content
Sign in to follow this  
chucky

ACTi NVR v3.0

Recommended Posts

A question for anyone that is using the latest ACTi NVR software. For live viewing lets say 16 cameras. Instead of displaying all 16 cameras at once on your monitor (checkerboard). Does the software have an option to display each single camera full screen? Possibly with a timer allowing 5 - 10 seconds before displaying the next camera. I have seen this setup on analog DVR's.

 

Thank You

Chucky

Share this post


Link to post
Share on other sites

Chucky,

 

An engineer with ACTi was giving me some other help so I asked him your question. Here is what he said.

 

Yes, to achieve the goal, you will need to create a view for each camera, then add those view into a tour (with timer 5~10).

 

Steps to setup:

1. Choose single view and drag your first camera into the layout.

2. Click Save View at top and name it camera 1 (or anything else you prefer).

3. redo the same steps to rest of your camera.

4. Click on Tour button at top (next to view section).

5. Create New View and select Device Group, then set timer duration (default is 5sec). Click Apply.

6. Click on Tour again to enable the New View Tour that you just created.

 

Hope that helps

Share this post


Link to post
Share on other sites

Greg

 

I appreciate the feedback you provided from ACTi support. This is the exact information I was seeking.

 

Thank You

Chucky

Share this post


Link to post
Share on other sites

No problem. I was curious if you it was possible for future use and was already talking to them.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×