adamxp12 0 Posted August 15, 2013 I have a Dedicated Micros D4A DVR and i need help i used the ridgecrop fat32 formatter and copied the firmware over to the drive When powered up the unit will unpack and install the firmware then it will reboot then go through all the screens and stop at a blank screen (No Menus Or Text) I have tried letting it sit for some time but eventually the hard drive goes to sleep What is causing it to stop booting? Share this post Link to post Share on other sites
adamxp12 0 Posted August 16, 2013 Can someone help me with this I can not afford a new dvr at the moment Share this post Link to post Share on other sites
treborsz 0 Posted August 19, 2013 I suggest you test a different hard drive. When problems persist after a proper "recovery", only hardware is left as culprit. Share this post Link to post Share on other sites
adamxp12 0 Posted August 19, 2013 I suggest you test a different hard drive.When problems persist after a proper "recovery", only hardware is left as culprit. I changed the drive and reflashed it and it still unzips then goes to a black screen Thanks anyway. thats something i did not think to try. Share this post Link to post Share on other sites
