Machineman 0 Posted August 23, 2013 I have several Q-See QCN7100B 1.3m Bullet cams from costco. On the Q-See website there latest firmware is dated 12/07/12. But Dahua for the same cam has had more recent firmware releases, specificaaly that improve motion detection which is what Im interested in. Has anyone been able to get a newer Q-see firmware or tried a recent Dahua firmware on the same Q-see cam? I've contacted Q-See support and they stick by the Dec 2012 firmware as the latest and greatest. Or how about the firmware version on recently purchased Q-See QCN7100B cams, is it still 12/07/12? Thanks.. Share this post Link to post Share on other sites
Machineman 0 Posted August 25, 2013 Anyone tried Instaling Dahua firmware on these Q-see cams?, or has an opinion if it will work or not? EDIT: I tried loading Dahua firmware 2013-5-17. It wouldn't load. So I will have to wait for Q-See to release there version of it which might never happen. Share this post Link to post Share on other sites
MaxIcon 0 Posted August 25, 2013 Someone reported loading their Dahua with QSee firmware to check it out, then trying to go back and it wouldn't let them, so it sounds like the QSee firmware prevents you from doing this. Share this post Link to post Share on other sites
