SicilianDragon 0 Posted August 31, 2013 Hi Gurus, What POE switches (4 - 8 ports) brand and model you recommend for ACTI dome IP Cameras? I am using Cisco SG series on my network and will have around 50 IP Cameras. I read on some post about some POE switches that is not industrial grade that supply less power than the IP camera needed. Thank you and more power to CCTV Forum. Share this post Link to post Share on other sites
SicilianDragon 0 Posted September 3, 2013 Hi, Any suggestions please? Thank you in advance and more power. Share this post Link to post Share on other sites
Dr3am 0 Posted September 6, 2013 All of the commercial grade PoE switch's have an allowance of 15.4 watts per port. Use 2-24 port GBE and 1-4 port GBE Zyxel PoE switch's with RJ-45 SFP's to tie the network together. This way it will be a gigabit network. 50 IP camera's is alot so gigabit will def speed it up. I have done it on a 32 channel setup and works alot faster than the first switch's I installed. Good Luck!!! Share this post Link to post Share on other sites
galaxy60 0 Posted September 15, 2013 ZyXEL GS2200-24P for all 24 Ports full PoE you will need the additional PSU model Number:- PPS250 Or you could try the ZyXEL GS1910-24HP which is PoE Plus Share this post Link to post Share on other sites