CrownSeven 0 Posted September 4, 2013 I have the swann package sold by costco (NVR8-7200). The cameras are all being powered by the NVR - which means they are also getting their own separate IP's assigned by the NVR. Therefore to log into the cameras I need to disconnect them from the NVR, connect them to my PC and log into them using the previously described methods as explained on this site a few times. Is there a way of keeping the cameras connected to the NVR AND be able to log into them? I've tried playing with the static route settings on my router but no luck so far. Any suggestions? Share this post Link to post Share on other sites
ctbaker 0 Posted September 4, 2013 Hi, I asked this question recently regarding a Hikvision NVR. Please see my thread regarding links on the forums here that may work for you plus a youtube video. http://www.cctvforum.com/viewtopic.php?f=15&t=37471 Share this post Link to post Share on other sites
CrownSeven 0 Posted September 4, 2013 Thank you sir, that gets me pointed into the right direction. If I figure it out I'll post back. Hi, I asked this question recently regarding a Hikvision NVR. Please see my thread regarding links on the forums here that may work for you plus a youtube video. http://www.cctvforum.com/viewtopic.php?f=15&t=37471 Share this post Link to post Share on other sites