Zainudin 0 Posted September 29, 2013 Hi. can be the signal for the ethernet cable(utp) will be interrupted if the coaxial cable for cctv cameras is tighten together for cabling???.. if you have ideas, please share with me..thanks a lot.. Share this post Link to post Share on other sites
Kawboy12R 0 Posted September 29, 2013 You shouldn't have any problems running cat5e (or any other UTP) next to coax for cctv cameras. Everything is best run by itself if possible, but I wouldn't expect any problems at all. Share this post Link to post Share on other sites
Zainudin 0 Posted September 30, 2013 Thanks a lot!.. thats what im thinking if i would put coaxial cable into pvc network cable trunk with the utp wire together, there will be extortion that will happen to the data or vise versa... Share this post Link to post Share on other sites
Kawboy12R 0 Posted September 30, 2013 Never say never, but you shouldn't have any problems at all. If there IS a problem, it is probably caused from a defect with the wiring, not because they should never ever be run together. Share this post Link to post Share on other sites
