kdnet WEB view TESTING TRANSMISSION SPEED

[buerckster 0]

I am running the kdnet 2.50.16 software with my card just upgraded from 2.49 and noticed my web view will show my camera selections drop downs and does connect but freezes at TESTING TRANSMISSION SPEED and it wont show the cams view

if i connect a packet sniffer ETHEREAL it shows packet port 8013 to 2217 going back and forth from server to client pc...

 

my remote client works fine

 

im not behind a router . I even tried it from the server pc where the software is installed and same no ivew of cams.

 

I am using IE 6 this use to work on the 2.49 version.

 

is this broke in 2.50.16 i even removed the DVR and client CLASS files on the client pc and let it reinstallthem with the 2.50.16 software.

 

 

ANY IDEAs other than go back to the 2.49.

 

i think i have the old version card because when i load the 3.x version it doesnt see the card.

[loop 0]

Enable (mark the check boxes) for all of the cameras for the user "Anonymous" under user settings.

[buerckster 0]

THANK YOU loop fixed i do remember turning those off because i didnt want that login seeing any cams since i couldnt remove that user from the config.. so it was self inflickted.

 

 

i wish i could upgrade to version 3 or 4 im stuck on 2.5.16

[buerckster 0]

has anyone figured out how to change the web cam login from the anonymous user?