MACE's Cam 68cir IR Color Dome Image

[kandcorp 0]

And how exactly do you do that?

Photoshop.??

[rory 0]

Paint Shop Pro, well they all have it .. select COLOR and SOLARIZE .. also Negative Image gives a similar Effect.

 

I wonder if they sell Solarizing Glasses, would be perfect to see the IR beam when adjusting at night ..

[kandcorp 0]

Thanks dude..pretty cool tings

[rory 0]

some more .. the darker spots within the beam represent IR glare.

 

EX82 Beam - its 30 degrees and on a 4mm setting.

 

UF100 on full power, 60 degree beam, note the glare from the building, its just too power ful for that close.

 

UF500 with 12mm lens, 10 degree beam ... note the power of this baby. - Negative Image, then Solarized.

Notice how the IR light goes way to the end of the driveway, as well as the edges, this is a great setting with the 10 degree beam, and a 12mm lens.

[jisaac 0]

ok I got it a little better

and a day image

[jisaac 0]

yes that is me and my future surveillance system engineer.

(he is in training)

You have to start them out young

[rory 0]

IR beam in red, lens reflection in yellow .. much better than it was.

 

[jisaac 0]

do you mean in the yellow is the beam reflecting back into the lens?

[rory 0]

yeah, it goes up and around in a ring, but not as evident as the lower part ..

[jisaac 0]

what do you think I can do to get rid of that?

[rory 0]

if you can get into the camera, and try and find a small rubber or foam ring, glue that around the lens area, so it is tight up against the dome glass when it is closed, to block out any IR getting onto the lens glass area from inside, stopping the IR reflecting back onto the lens.

[Jasper 0]

It already looks 100% better.

 

That camera doesn’t look so bad after all.

[kandcorp 0]

Yea it does look better.

But, the glass covering the lens and the IR's is Flat. There should be no way that the IR is reflecting back into the lens. That was the so called "Brilliant" design of those cameras.