floridaguy 0 Posted October 9, 2013 I am unable to remotely view my NVR video through a web browser but I can use the iPhone app just fine as well as connect and do everything within a web browser while within my home network. I can remotely connect to the NVR and make settings changes and pull/review the system logs but I cannot see any video. I have installed the plugin and checked my settings in my router and NVR. I was hoping someone could add anything I was missing. Attached are my settings: Share this post Link to post Share on other sites
luckyfella 0 Posted October 9, 2013 Do not use 80 for http, and do you have only one router, or a modem/router, and than your own router? Share this post Link to post Share on other sites
floridaguy 0 Posted October 9, 2013 I have a Comcast cable modem and a Linksys router. I just changed my HTTP in both to 3000 and can connect but still cannot view the video feed. I can: view video feed within a browser while on my home network use the iPhone app connect remotely and can read and change settings in all the menus and search and read event logs just no video live or playback I cannot: view video feed remotely within a browser outside my home network by connecting http://xxx.xxx.xxx.xxx:3000 Share this post Link to post Share on other sites
milkisbad 0 Posted October 9, 2013 Did you put in the gateway in the NVR? 'I have a Comcast cable modem and a Linksys router' Looks like you have two routers. Linksys is usually 192.168.1.x while Comcast is 10.1.10.x. Type in 10.1.10.1 and see if it brings you to the comcast router, if it does, then configure port forwarding on the comcast router and forward to the IP of the linksys routers, which you then already set up to forward to the IP of the NVR. default comcast business class user and pw is cusadmin and highspeed if you need. for residential is admin and password . Share this post Link to post Share on other sites
floridaguy 0 Posted October 10, 2013 (edited) The Gateway for the NVR is the same as my Linksys router 192.168.1.1. I have an SA cable modem provided by Comcast with nothing configurable as a residential customer that i have ever seen. This is it: http://www.amazon.com/Scientific-Atlanta-DPC2100R2-Cable-Modem/dp/B002V41X2M Edited October 12, 2013 by Guest Share this post Link to post Share on other sites
floridaguy 0 Posted October 10, 2013 here is my NVR Share this post Link to post Share on other sites
floridaguy 0 Posted October 21, 2013 Still unable to see the video feed in a remote browser even after changing HTTP to 3000 as stated in an earlier post. Share this post Link to post Share on other sites
shockwave199 0 Posted October 21, 2013 - Does the nvr have CMS software and do you have problems with feeds in that? - Have you asked support about browser compatability? - Have you tried different pc's remotely, or is the problem just on one pc/laptop? Try a couple different ones and see. - Are you sure you don't have your camera channels set to hidden? Works in the phone so probably not. - Have you confirmed that all your forwarded ports are showing open? Share this post Link to post Share on other sites
