Jump to content
Sign in to follow this  
hazim

HD-SDI Camera on UTP & Balun

Recommended Posts

Dear,

 

I want to ask if connecting SDI (Serial Digital Interface) CCTV cameras to the DVR via passive video balun is possible as any analog camera or no? Also, if a 2MP HD-SDI camera is connected to a WD/960H DVR, will it give a better image than a good 700TVL effio-e camera? or using an SDI DVR is a must with SDI cameras?

 

Regards,

Hazim

Share this post


Link to post
Share on other sites

Not likely. HD-SDI uses very high frequency signals which will not propagate through baluns. The HDcctv Alliance has supposedly approved HDcctvCX, which will allow transport over UTP but I have no idea when such products will be released nor if the technology will filter down to HDcctv's generic brother HD-SDI. http://www.highdefcctv.org/hdcctv-specification

Share this post


Link to post
Share on other sites

Hello,

 

The HD-SDI has complaince issue for the camera, dvr and gear. So you have to hook up HD-SDI camera to HD-SDI DVR. As for balun, which some supplier has release SDI-Balun for bridge cat5/5e cable with edge side.

 

Some supplier has offer Hybrid DVR solution to SD+HD-SDI, IP+HD-SDI or more SD+IP+HD-SDI.

Share this post


Link to post
Share on other sites

Thank you.

I still didn't know what will I see on the screen if I connected an HD-SDI camera to a general D1 or WD DVR? a good but not HD image, or a bad image or no image at all?

Share this post


Link to post
Share on other sites
Thank you.

I still didn't know what will I see on the screen if I connected an HD-SDI camera to a general D1 or WD DVR? a good but not HD image, or a bad image or no image at all?

 

100 % no image at All

Unless you have Hybrid DVR

Share this post


Link to post
Share on other sites
Thank you.

I still didn't know what will I see on the screen if I connected an HD-SDI camera to a general D1 or WD DVR? a good but not HD image, or a bad image or no image at all?

The same thing you would get if you hook your TV up to a gas main. They both deliver energy but obviously are not inter-compatible.

Share this post


Link to post
Share on other sites

Its depends on which port you connect to HD-SDI camera becasue some supplier has design one HD-SDI and another is CVBS.

 

But even you hook up cvbs to analogue(D1/WD1) DVR the quality is blurry. So I think you better to migrate to hybrid DVR to finished this project.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×