ChuckP 0 Posted December 29, 2005 Hey guys I saw a post on where to get a USB dongle but it was never answered so I am going to give it a try. I don't know where I purchased my card from since it has been over a year. I am looking to get the dongle and I want to make sure it will work with the V2 as I heard there was a V3 out now. Oh Also I just tried to load the 6.05-->6.11 drivers and it told me that my card was out of date and needed to be updated by my vendor... any ideas? Thanx, Chuck Share this post Link to post Share on other sites
scottj 0 Posted December 29, 2005 You need the V3 board to update, even with the dongle. Scottj Share this post Link to post Share on other sites
ChuckP 0 Posted December 29, 2005 Is there any way to get a V3 updated board if I don't know the vendor? Share this post Link to post Share on other sites
scottj 0 Posted December 29, 2005 www.digitalwatchguard.com Talk to Sal (forum member). They sell boards to end users at reasonable prices and are very good people. Scottj Share this post Link to post Share on other sites
andy 0 Posted December 29, 2005 You can go straight to the 7.x software with the USB Dongle. No need to upgrade your card. But, you won't be able to use 6.1x software. Share this post Link to post Share on other sites
scottj 0 Posted December 29, 2005 He has the V2 board Andy, we tried it here and it doesn't work. Scottj Share this post Link to post Share on other sites
ChuckP 0 Posted December 31, 2005 Thanx guys for laying it out. I guess I will stick with my V2 as it works well. I guess they are stopping development of the V2 board in favor of all the V3 software? Share this post Link to post Share on other sites
Securitymaster 0 Posted January 1, 2006 I think that is more of a anti-piracy move on their part Share this post Link to post Share on other sites
