joseph.chen0312 0 Posted November 1, 2013 We having problems where people not registered on the database have access into the building sometimes not all the time and also people who are registered on the database seem to loose their access every now and again.we have been in touch with the manufacturer and they can't seem to solve the problem .are there any other integrators with the same problem.And if so how did you resolve the issue Share this post Link to post Share on other sites
tomcctv 190 Posted November 1, 2013 We having problems where people not registered on the database have access into the building sometimes not all the time and also people who are registered on the database seem to loose their access every now and again.we have been in touch with the manufacturer and they can't seem to solve the problem .are there any other integrators with the same problem.And if so how did you resolve the issue Finger readers are like cameras ......... You can go cheap sensors to electrical impulse . CCD sensors are the cheapest........ Work 80% of the time but have problems with multi users so sensor need cleaning ...... Which by your discripstion is your problem Screen has last persons print ...... Allowing none registered to have access also people who do have finger access the sensor is dirty so print is not accepted . Share this post Link to post Share on other sites
joseph.chen0312 0 Posted November 1, 2013 Thank for your common and instruction. But I think clean job not high ratio for those fatal mistake. http://www.bromba.com/knowhow/bricklayers.htm Share this post Link to post Share on other sites