Hikvision DS-2CD2132-I Bad firmware flash.

[Outerlimits 0]

I have a Hikvision DS-2CD2132-I that I flashed to the 5.02 firmware. After doing so I could not find the cameras ip using the SADP software. But I could log in to the camera with a web browser. Now I cant log in via web browser and I still can't find it using the SADP. I have read that when the bullet version of this camera you can do a hard reset with the button. With the dome I can't find a reset button.

Any help would be appreciated.

 

Thank you

Jake

[MaxIcon 0]

You can re-apply a failed firmware upgrade with their TFTP auto-update tool:

http://www.hikvisioneurope.com/portal/index.php?dir=Z%20OLD/Technical%20Materials/Special%20Tools/TFTP-Auto-Update/

 

There's a thread on this here, and it sounds like the reset button would help if you can find it. I'm not familiar with the Hik domes, though.

http://www.cam-it.org/index.php?topic=5170.0

[Boogieman 1]

yes, you just need to reset it, its fine...I believe the reset button is requires the removal of the glass dome, its in there somewhere....

[Outerlimits 0]

I tried the recommended TFTP auto-updater, no change. It sounds like I need to hit the restart button but I can't find it ,if there is one. Any more suggestions would be appreciated.

 

Thank you

 

Jake

[Boogieman 1]

there is a reset button, look closely inside the unit on the pcb board

[buellwinkle 0]

I checked every visible square inch of mine (a Derytech version but with 5.0.2 firmware loaded on it) and I can't find a reset button. I went through the manual and there's no reset button shown for that model but other models have a reset button.

 

The manual is here and page 42 starts Dome IV which is this dome -

http://www.hikvision.com/UploadFile/image/2013051507480695791.pdf

 

If someone does find a reset but, prove me wrong, show a picture of it.

 

If it were me, I would go back and get the original firmware that was on it and try installing that via TFTP. If it's HIkvision branded, regardless of where you got it, I would call their support.