PJNTJ 0 Posted November 26, 2013 NewB here. Was going to build a system but short on time and energy so I went with the Lorex in a box, LNR200, IP 2.1MB cams. Got cams and NVR in place, working. Now onto internet/remote viewing hookup. Directions say plug the NVR into the router. Router is 75 feet across the house. Can I use a wireless network adapter for this? or would you recommend cable? Will be running 4 cameras. Share this post Link to post Share on other sites
SectorSecurity 0 Posted November 27, 2013 If it will support a wireless adapter you should have no issues, WLAN speeds should be no problem for 4 cameras provided the signal is strong. If it wont support a wireless adapter, you could setup a router as a bridge and connect a shorter patch cable to the bridge. Share this post Link to post Share on other sites
PJNTJ 0 Posted November 27, 2013 Thank you for the reply Mr. Sector. In the mean time I thought about it, got another opinion of a trusted friend who said taking the extra little bit of time to run the wire would be worth it.....So I did, worked out well. Share this post Link to post Share on other sites
ssnapier 0 Posted November 27, 2013 Wired is always best if possible, just make sure you protect that wiring from the sharp objects bad guys like to carry around. Share this post Link to post Share on other sites
