Jump to content
matty123

Dahua PoE problem

Recommended Posts

Hello everyone!

 

I just got my first Dahua IPC-HFW2100 camera and it looks very nice.

But I have one problem. I can not get any link on the network, i have tried to use two PoE injectors.

 

First one: Ubiquiti 15v/0.8A

Secound one: Ubiquiti 24V/0.5A.

On the camera can I read input 12V/0.5A.

 

But non of them give LINK on my router.

 

Maybe i need another PoE injector or maybe the Dahua is dead?

 

I hope someone can help me.

Best Regards

Matty

Share this post


Link to post
Share on other sites

ok, "looks good" means it looks good physically or via the web browser?? Very confusing.............

 

plug cam into STANDARD 48vdc PoE and use IP camera software to find it on your network. Use software to change camera network setting if needed.

 

You can power cam via 12vdc via 2.1mm cannon plug..observe polarity

 

If you used ANYTHING else to power the camera you may have blown it up...............duh!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×