matty123 0 Posted December 10, 2013 Hello everyone! I just got my first Dahua IPC-HFW2100 camera and it looks very nice. But I have one problem. I can not get any link on the network, i have tried to use two PoE injectors. First one: Ubiquiti 15v/0.8A Secound one: Ubiquiti 24V/0.5A. On the camera can I read input 12V/0.5A. But non of them give LINK on my router. Maybe i need another PoE injector or maybe the Dahua is dead? I hope someone can help me. Best Regards Matty Share this post Link to post Share on other sites
VST_Man 1 Posted December 12, 2013 ok, "looks good" means it looks good physically or via the web browser?? Very confusing............. plug cam into STANDARD 48vdc PoE and use IP camera software to find it on your network. Use software to change camera network setting if needed. You can power cam via 12vdc via 2.1mm cannon plug..observe polarity If you used ANYTHING else to power the camera you may have blown it up...............duh! Share this post Link to post Share on other sites
matty123 0 Posted December 12, 2013 I solved it, i changed PoE adapter to 802.11af Share this post Link to post Share on other sites
