Jump to content
Sign in to follow this  
sachida

Need help with installation HIKvision DS-2CD2032-I

Recommended Posts

 

Hi

Very new to CCTV camera and just purchased three DS-2CD2032-l

I have to use power over Ethernet adapter for two locations as I dont have ethernet outlet in the exterior of the home.

I tried setting it up as shown in the network map below but could not find the camera with included software (SADP).

To trouble shoot I have done following

 

1. checked the poe connectivity for internet with laptop and its working

2. directly connected camera with desktop with LAN cable but camera does not show up on SADP software

3. repeated #2 with laptop still no connectivity.

 

Unclear how to troubleshoot from this point on. I thought the camera were POE and so does the sticker on the camera say. But so far not working just with ethernet connection. Please advise

 

May be I need poe injector somewhere in the scheme? please advise

1547663902_cameramap.thumb.jpg.7d8171bc5794430f3c6a825fa2662b54.jpg

Share this post


Link to post
Share on other sites

The Hikvision 2032's come with a fixed IP address of 192.0.0.64 so you may need to configure your PC with a compatible IP. You may also need to disable any firewall.

Share this post


Link to post
Share on other sites

Talked to HIKVISION tech support. They suggested using poe injector. It has to be post ethernet over power adapter.

I ordered tplink one from amazon. will update with results

Share this post


Link to post
Share on other sites

The camera is POE.

 

Use a network switch that has POE built in.

 

Use the SADP windows tool to set the IP address, no need to change the PC ip address.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×