GeoVision NVR + AXIS M3007-PV

[kolson88 0]

Using GeoVision NVR and trying to implement an AXIS M3007-PV.

 

I'm familiar with a handful of other AXIS cameras, but this one is giving me a little trouble. I think I'm just being stupid and missing something very small.

 

The default view for M3007 is basically a "fisheye" view. I want GeoVision to be viewing the Panorama or any other kind of view. How do I change that? In the http interface, it gives you a dropdown menu on the main screen, but I assume that's just for http live view purposes. There has to be something in the setup menu that I'm missing to make the camera default to a certain stream profile/view.

 

Also while adding M3007 into GeoVision, there's no selection for M3007 in the drop down menu. I was thinking maybe it was under Protocol > ONVIF, but after some quick research M3007 doesn't even support ONVIF. Where is it?!

 

GeoVision changelogs link, version 8.5.7.0. Wasn't aware there was 8.5.8.0, but that doesn't matter.

http://www.geovision.com.tw/english/4_2.asp

 

Thank you for your time.

[kolson88 0]

Alright, so after reading my previous post, my question sounds kind of confusing.

 

After some searching, I found this FAQ post on the AXIS website that helps a little.

http://www.axis.com/techsup/faq/index.php/?action=artikel&&cat=175&id=115871&artlang=en&highlight=

 

I'm able to set my default view in my web browser to panorama. My only problem is that when I add the AXIS M3007 to my GeoVision NVR, it still shows the fish eye view.

 

Anybody know how to fix this?

[gb5102 0]

Can you access Camera Lens setting in Camera Configure menu (hot-key F9)

 

[gb5102 0]

I've never used a 3rd party fisheye cam, so my suggestions are straight out of the manual.

check out section 3.22.2 in the 8.5.8 User Manual

http://www.usavisionsys.com/forums/download/file.php?id=698

[kolson88 0]

I believe if forces you to use ONVIF.