CBX 0 Posted December 20, 2013 Hi all I'll post here as the D-link forums don't like my IP range/ISP for some reason. I'm thinking about buying 4 D-link DCS-7110s but being a linux geek it would drive me nuts to have them on my network and not have telnet/ssh access on them. Poking around the firmware seems to suggest telnet is disabled but /cgi-bin/admin/mod_inetd.cgi?telnet=on would turn telnet on. Authentication might be some trouble but I can see the passwd file so I'm sure that could be overcome. Does anyone know if this works (and maybe on other D-link cams too)? I can't see this URL listed anyway using a Google search. ------------------------ Also motion detection on these cams is limited to 20 seconds per recorded file (according to the manual). What happens if there is 30 seconds activity? 2 files or last 10 seconds not recorded? Thanks Share this post Link to post Share on other sites
CBX 0 Posted December 20, 2013 Interesting enough (and if not already known to all), the firmware for the DCS-7110 looks to be the same (or as near as makes no difference) to the Vivotek IP8332. On the DCS-7110, the firmware version file says IP8332-DLNK-0104b. On the IP8832, the firmware version says IP8332-VVTK-0300e The /cgi-bin/admin/mod_inetd.cgi?telnet=on should work to turn on telnet on the Vivotek IP8332 also. If anyone sees this and wants to give it a go please let me know. Share this post Link to post Share on other sites
