ibrat82 0 Posted January 12, 2014 Hi I'm installing 2 ip cameras in one room with the nvr 50 feet away in another room. There's no easy way to run wiring. I was wondering if it's possible to install the ip cameras to a power line adapter and the other end of the power line into the nvr? Would I have to use single one port power line adapters or can I use 3-4 port adapters? Share this post Link to post Share on other sites
tomcctv 190 Posted January 12, 2014 Hi I'm installing 2 ip cameras in one room with the nvr 50 feet away in another room. There's no easy way to run wiring. I was wondering if it's possible to install the ip cameras to a power line adapter and the other end of the power line into the nvr? Would I have to use single one port power line adapters or can I use 3-4 port adapters? Yes power lines are not a problem. ... Try and spend as much as you can on them. .... Not all will allow for audio Use as many and you want or a good one and use a switch at multi camera end Share this post Link to post Share on other sites
